News & Updates

Boelube 70104 Liquid has received SONACA Validation

Posted by on Feb 13, 2016 in Boelube News, News & Updates | Comments Off on Boelube 70104 Liquid has received SONACA Validation

Boelube 70104 Liquid has received SONACA Validation No.:
ETR EMB550F/TP02/BE/R
N° 0/9902/15-005-0
Validation for the use of lubricants during drilling of Composite Laminates.

Testing was performed under customer specification:
Airbus: AIPI 01-02-005 and AIPI 01-02-003
Bombardier: BAPS 188-007
Embraer: NE 40-273

Qualification Materials include: Carbon fiber reinforced plastics, Unidirectional laminates, and RTM6 and 8552 resins

Boelube MQL proves it’s better.

Posted by on Apr 23, 2013 in Boelube News | Comments Off on Boelube MQL proves it’s better.

One of the earlier uses of MQL was in aircraft manufacturing. Freon® gas was used in three distinct areas of the riveting process – drilling, rivet insertion, and rivet-head milling. Because of the undesirable effects of Freon® gas on the ozone layer, Boeing manufacturing research and development engineers introduced an alternative method using Boelube® lubricant compositions to efficiently lubricate and cool tools by preventing heat buildup, while greatly reducing the reworking after drilling that had been necessary with Freon® because of exit burrs, oversized holes, and a rough finish on the inside surface of the holes.

Boelube® lubricants were used in drilling, reaming, and coldworking of fastener holes in aircraft wing skins; installation of wedge-head lock bolts; lubrication of hand drills; and on machinery that automatically drill rivet holes and install rivets on large sections of airplanes. It was shown that the application of minimal quantities of BOELUBE® lubricant could reduce friction, speed production, increase tool life, and improve surface finish and hole quality in a number of machining operations.

Orelube ET Synthetic Grease

Posted by on Apr 23, 2013 in Orelube News | Comments Off on Orelube ET Synthetic Grease

Orelube ET-2G grease approval and use on SMI Smiform division (Italy) blow molder – line 5 Model No. SR-20

Orelube ET-2B synthetic grease approval and use on SMI Smiform division (Italy) blow molder – line 5 Model No. SR-20

High Speed Draw Texturing Machines

Posted by on Apr 23, 2013 in Orelube News | Comments Off on High Speed Draw Texturing Machines

Orelube BM-50 approval and use on Hong Yuan FK6.HY1 series High Speed Draw Texturing Machines for high processing speeds for standard, multi-feed and microfilament polyester yarns.

 

Barmag FK6-12 Texturizing Machines

Posted by on Apr 23, 2013 in Orelube News | Comments Off on Barmag FK6-12 Texturizing Machines

Orelube BM-50 approval and use on Barmag FK6-12 Texturizing machines to lubricate the traverse motion unit.